|
|
Post by kentris on Feb 8, 2006 11:38:34 GMT 10
If I'm correct, someone written a DIY up on how to get the door step garnish to light up when you open door by connecting it to the wires into the firewall.
Also, I can't seem to find the write up on how to get like neons to light up when door is open?
|
|
|
|
Post by z3n on Feb 8, 2006 13:57:00 GMT 10
nah, write up isn't on ausfit.
light for hatch door is quite easy to do
really depends how you want to set it up.
you could connect it to the ceiling wires
|
|
|
|
Post by kentris on Feb 9, 2006 2:30:15 GMT 10
nevermind, found it over at ozhonda.
Requires connecting it to the brown wire in the firewall (the little knob thing that sticks out next to your wheel chart) and connecting the +ve to one of the wires in the fuse box.
|
|
ahcash
Memßer
[H:4]
Posts: 1,463
|
Post by ahcash on Feb 9, 2006 8:19:54 GMT 10
kentris, where is the link?
|
|
|
|
Post by kentris on Feb 9, 2006 9:10:54 GMT 10
www.ozhonda.com/forum/showthread.php?t=30177not a proper guide as the guy already installed it first before writing a brief guide. Although if any of yous are thinking of doing it first before me, then maybe write a guide? I was thinking of getting some neons and putting it under footwells and hookin it up to the interior light. So when I open door, they come on 
|
|
