Resetting and Recalibrating CVT ??

[ahcash]

My CVT is getting a bit noisier .. might give the following a try and see if there is any improvement.. The following was extracted from The Temple of VTEC.. vtec.net/forums/one-message?message_id=284577

Try at your own risk.. Neither Fitta'er Australia or myself will be responsible or liable for any issue / problem caused by trying the following...


RESET CVT MEMORY (from singapore forum)
a) Start the car till it's normal temp
b) Do not switch on your air-con, radio, and other electrical stuffs
c) Apply handbrake (throughout this whole procedure)
d) Apply footbrake (do not release)
e) Put your gear to N for 2 mins
f) After 2 mins, put your gear to D for 1 min

RE-CALIBRATE CVT GEARBOX (IF CHANGE BATTERY) - autoworld forum
a) Starts the car and let it runs until the engine cold indicator is off.
b) Switch off the engine and restart again.
c) Switch on the front lights.
d) Shift the gear to 'n'. while stepping on the brake
e) Shift the gear between 'n', 'd', 's', 'l', 's', 'd' and back to 'n'.
f) Repeated this process about 3 times about 1-2 seconds between the
gears.

[ykc8]

so how do u feel on ur car after those processes?

[ahcash]

I doubt there will be any changes.. If there is anything wrong with the CVT, those guys at the service could have pick it up from the fault code when I serviced my car a few weeks ago..

I haven't tried it out yet.. but will certainly give it a try these few days.. will keep you guys posted.