|
|
Post by nick on Sept 1, 2005 10:33:40 GMT 10
yeah~~ I only bought 1 big 2800mm mesh, the color is black~ hopefully it is enough to cover the ventilation... ><~~
|
|
|
|
Post by channeldavid on Sept 1, 2005 14:55:18 GMT 10
yeah~~ I only bought 1 big 2800mm mesh, the color is black~ hopefully it is enough to cover the ventilation... ><~~ Oh! u bought Black finally! haha! And Kelvin, us said "the people who have completed the diy will need to help out others", do u mean that i need go to Sunflower, or i only need to go to buy food? |
|
|
|
Post by bnefit on Sept 1, 2005 15:50:58 GMT 10
i was thinking that you can stay behind and help the rest of the people with their diy. joe (who is not doing the diy) and i can manage the preparation of the food. and those who completed the diy in the first round (roger and kobe) will need to help nick and ricky after that. philip will not be around after 10.30am, so you'll need to be there to guide nick and ricky as their jazzes are pre f/l model and you already have experience with that.  therefore its better for you to be there. |
|
|
|
Post by wickee on Sept 2, 2005 2:00:30 GMT 10
I would like to confirm that I am using / paying for sunny's mesh. Since I havne't bought the mesh.
|
|
|
|
Post by channeldavid on Sept 2, 2005 2:38:02 GMT 10
OK!
Actually, the quality of Sunny's mesh is much better than SAAS one (the one bought form Super Cheap)!!
Nick, i am not sure 1 mesh is enough or not, i suggest u buy 1 more, if end up only use 1 mesh, u can take it back and get refund!
Ricky, if u are going to use Sunny's mesh, that should be enough for u!
|
|
|
|
Post by Half Schumacher on Sept 2, 2005 9:51:17 GMT 10
ok guys. the following is confirmed.
9am start at Sunflower Motors. Suite 2, 85 Compton Road, Underwood.
Roger and Nick are turning up at 9am.
Kobe and Ricky, u're welcome to come at 9 as well but i guess you guys must arrive by 10:30am the latest.
Kelvin is expected to turn up around 9ish. Dave man, please turn up when u can. the earlier the better.
Joe will meet with Kelvin a little later.
i'll leave at 10:30 for a few hours and will join you guys later.
Chris will finish work at 3:30 and he will join us then.
any question pls contact Kelvin.
thanks all. can't wait till tomorrow.
|
|
|
|
Post by nick on Sept 2, 2005 19:59:38 GMT 10
wah~~ U are more even desperate than me~~ ^^
|
|
|
|
Post by Half Schumacher on Sept 3, 2005 12:45:01 GMT 10
it seems a good diy section.
i think we got Kobe's mesh on in record time of 45 minuates (including un & re fitting of bumpers)
|
|
|
|
Post by nick on Sept 3, 2005 22:52:40 GMT 10
grrrr~~ not bad for today~~ ^^ too bad Philip U didnt join us for BBQ after the DIY... ><~~
|
|
|
|
Post by wickee on Sept 3, 2005 23:53:09 GMT 10
it wasn't a complete DID today. Roger had a hard time and worked on it for the whole time ><
|
|
|
|
Post by bnefit on Sept 4, 2005 8:20:25 GMT 10
it was a pity we didn't get to see the fireworks in the end  |
|
|
|
Post by nick on Sept 4, 2005 8:42:57 GMT 10
|
|
|
|
Post by kentris on Oct 6, 2005 11:57:15 GMT 10
is it really that easy to take the front bumper off? or is there something more complicated to it? o.O
|
|
|
|
Post by nick on Oct 6, 2005 12:16:26 GMT 10
erm~~ there's abit different between 03 and 05~ but it shouldn't be hard to take it out~~ and it is suggested to have 2 ppl to pull the bumper out so that it wont get scratch at both side ^^
|
|
|
|
Post by Half Schumacher on Oct 6, 2005 17:07:31 GMT 10
no kidding man. it's just a few plastic fasteners and a few screws. that's really it.
putting it back is slightly harder as u need the plastic tray to tuck inside the bumper which may require somebody to help u out.
|
|
